One-kvm基于玩客云使用教程

博主：远方
发布时间：2024 年 08 月 19 日
9009 次浏览
29 条评论
3694字数
分类： Linux

1、开始使用

runyf_20250331112619.jpg

如上图，玩客云线连接好之后通电等待前面板显示绿灯，然后在路由器后台找到主机名为one-cloud之后在浏览器中输入ip地址访问，如果路由器还是没有出现ip或者无法打开路由器后台，可以使用接显示器或者网络扫描的方式找到pikvm的ip地址

runyf_20241124172014.jpg

2、重要说明

初始WEB和VNC账号密码都为 admin/admin且同步，root用户密码默认为 1234
ssh默认端口：22
web默认端口：80，443
vnc默认端口：5900

3、如何切换到root用户

runyf_20241124171037.jpg

runyf_20241124171140.jpg

4、如何设置静态IP？

需先切换到root用户操作

nano /etc/systemd/network/99-eth0.network

[Match]
Name=eth0

[Network]
#DHCP=yes
Address=192.168.6.8/24
Gateway=192.168.1.1
DNS=192.168.1.1

[Link]
MACAddress=B6:AE:B3:21:42:0C

5、如何修改MAC地址

需先切换到root用户操作，执行以下命令将生成随机MAC地址，最后将执行reboot命令重启系统

MAC="$(echo 2a:01:`openssl rand -hex 4 | sed 's/\(..\)/\1:/g; s/.$//'`)"
echo $MAC
sed -ie "s/MACAddress=B6:AE:B3:21:42:0C/MACAddress=$MAC/g" /etc/systemd/network/99-eth0.network
reboot

6、如何修改后台登录密码

需先切换到root用户操作

kvmd-htpasswd set admin
#输入密码
#重启服务，使修改生效
systemctl restart kvmd kvmd-nginx

7、系统安装

runyf_20250430193926.png

runyf_20250430194109.png

runyf_20250430200321.png

runyf_20250430200540.png

runyf_20250430200552.png

8、ATX电源控制

电源控制线连接到被控机开关机针脚 POWER SW

image.png

9、重刷固件

One-KVM固件更新或者系统出错使用

刷机工具以及刷机包文件下载地址

此处内容需要评论回复后（审核通过）方可阅读。

首先安装烧录软件 USB_Burning_Tool
将下载的固件 One-KVM_by-SilentWind_Onecloud_XXXXXX.burn.img.xz 解压，导入烧录工具

runyf_20250118222449.png

插上usb公对公的线，一头插在电脑上，另外一头插在玩客云靠近HDMI的USB口，然后找个牙签或者顶针插入玩客云背面小孔，接着插上电源，出现连接成功后点击开始即可

如果刷机报错，建议换台电脑重试

10、OLED驱动代码

此处内容需要评论回复后（审核通过）方可阅读。

11、参考链接

One-KVM官方文档

最后修改：2025 年 07 月 05 日

如果觉得我的文章对你有用，请随意赞赏

发表评论取消回复
使用cookie技术保留您的个人信息以便您下次快速评论，继续评论表示您已同意该条款

评论 *

私密评论

名称 *

🎲

邮箱 *

地址

29 条评论

Hontsui
July 24th, 2025 at 01:10 pm

该评论仅登录用户及评论双方可见

回复
yyds
July 21st, 2025 at 12:48 am

需要刷机

回复
胡桃李
July 13th, 2025 at 07:10 pm

需要刷机，感谢大佬

回复
昔年
July 12th, 2025 at 08:13 pm

OLED驱动谢谢

回复
花无心
July 8th, 2025 at 10:49 pm

1234567890

回复
无花
July 8th, 2025 at 01:43 pm

需要刷机，感谢老哥

回复
Frankie
July 5th, 2025 at 09:07 pm

OLED
需要刷机，感谢老哥

回复
花无心
July 5th, 2025 at 02:35 pm

需要刷机，感谢感谢

回复
Frankie
July 5th, 2025 at 07:57 am

需要刷机，感谢感谢

回复
新手小白
July 3rd, 2025 at 10:10 pm

非常正规测操作流程小白福利谢谢老哥OωO

回复
zz
July 1st, 2025 at 09:21 pm

需要刷机，感谢老哥

回复
Hauturier
June 28th, 2025 at 04:56 pm

需要刷机，感谢老哥

回复
Hauturier
June 28th, 2025 at 09:49 am

需要刷机

回复
天
June 22nd, 2025 at 09:34 am

需要刷机

回复
大辉
June 8th, 2025 at 08:47 pm

需要刷机

回复
SekerJobs
June 1st, 2025 at 08:54 am

需要刷机

回复
陆科佐
May 27th, 2025 at 11:11 pm

该评论仅登录用户及评论双方可见

回复
Payen
May 18th, 2025 at 11:15 am

需要刷机

回复
aaa
May 7th, 2025 at 02:54 pm

需要刷機

回复
Jeff
May 4th, 2025 at 11:56 pm

需要刷機

回复
大名鼎鼎的学生
March 28th, 2025 at 10:20 pm

支持

回复
如果
March 9th, 2025 at 03:28 pm

好东西谢谢

回复
leo
February 25th, 2025 at 05:23 pm

需要刷机，谢谢

回复
vanlea
February 11th, 2025 at 10:13 am

使用usb继电器，按下电源控制，提示driver offline:
kvmd.plugins.ugpio.cmd 2025-02-11 09:42:04,052 kvmd.plugins.ugpio.cmd kvmd.plugins.ugpio.cmd kvmd.plugins.ugpio.cmd kvmd.plugins.ugpio.cmd kvmd.plugins.ugpio.cmd kvmd.plugins.ugpio.cmd kvmd.plugins.ugpio.cmd kvmd.plugins.ugpio.cmd kvmd.plugins.ugpio.cmd kvmd.plugins.ugpio.cmd kvmd.plugins.ugpio.cmd kvmd.plugins.ugpio.cmd kvmd.plugins.ugpio.cmd kvmd.plugins.ugpio.cmd kvmd.plugins.ugpio.cmd kvmd.plugins.ugpio.cmd kvmd.plugins.ugpio.cmd kvmd.plugins.ugpio.cmd kvmd.plugins.ugpio.cmd kvmd.apps.kvmd.ugpio ERROR --- CMD(reset_press) => USBRELAY_HID
INFO reaped unknown pid 16204 (exit status 1)
ERROR --- CMD(reset_press) => Traceback (most recent call last):
ERROR --- CMD(reset_press) => File "/etc/kvmd/custom_atx/usbrelay_hid.py", line 73, in
ERROR --- CMD(reset_press) => main()
ERROR --- CMD(reset_press) => File "/etc/kvmd/custom_atx/usbrelay_hid.py", line 69, in main
ERROR --- CMD(reset_press) => send_command(device_info, id, onoff)
ERROR --- CMD(reset_press) => File "/etc/kvmd/custom_atx/usbrelay_hid.py", line 36, in send_command
ERROR --- CMD(reset_press) => device.open(device_info['vendor_id'], device_info['product_id'])
ERROR --- CMD(reset_press) => File "hid.pyx", line 143, in hid.device.open
ERROR --- CMD(reset_press) => OSError: open failed
ERROR --- CMD(reset_press) => Traceback (most recent call last):
ERROR --- CMD(reset_press) => File "/etc/kvmd/custom_atx/usbrelay_hid.py", line 73, in
ERROR --- CMD(reset_press) => main()
ERROR --- CMD(reset_press) => File "/etc/kvmd/custom_atx/usbrelay_hid.py", line 69, in main
ERROR --- CMD(reset_press) => send_command(device_info, id, onoff)
ERROR --- CMD(reset_press) => File "/etc/kvmd/custom_atx/usbrelay_hid.py", line 36, in send_command
ERROR --- CMD(reset_press) => device.open(device_info['vendor_id'], device_info['product_id'])
ERROR --- CMD(reset_press) => File "hid.pyx", line 143, in hid.device.open
ERROR --- CMD(reset_press) => OSError: open failed
ERROR --- Can't run custom command [ /etc/kvmd/atx.sh reset ]: RuntimeError: Custom command error: retcode=1
ERROR --- Can't perform pulse of Output(reset_button, driver=CMD(reset_press), pin=0) or operation was not completed: driver offline

回复
小有名气的男孩
January 19th, 2025 at 02:34 pm

刷机感谢！！

回复
小有名气的男孩
January 19th, 2025 at 01:21 pm

需要刷机，感谢感谢

回复
阿斯顿
November 27th, 2024 at 07:29 pm

nano /etc/systemd/network/99-eth0.network
设置完了IP地址如何保存?

回复
1. 远方
  November 27th, 2024 at 07:52 pm
  
  @阿斯顿
  
  先按ctrl+o，回车保存。再按ctrl+x，回车即可
  
  回复
  1. 3
    March 17th, 2025 at 09:52 pm
    
    @远方
    
    nano /etc/systemd/network/99-eth0.network
    改完就找不到 ip了，怎么回事
    
    回复